1. What is the MAIN
benefit of designing tests early in the life cycle?
It helps prevent
defects from being introduced into the code.
2. What is risk-based testing?
Risk-based testing is the term used for an approach
to creating a test strategy that is based on prioritizing tests by risk. The
basis of the approach is a detailed risk analysis and prioritizing of risks by
risk level. Tests to address each risk are then specified, starting with the
highest risk first.
3. A wholesaler sells printer
cartridges. The minimum order quantity is 5. There is a 20% discount for orders
of 100 or more printer cartridges. You have been asked to prepare test cases
using various values for the number of printer cartridges ordered. Which of the
following groups contain three test inputs that would be generated using
Boundary Value Analysis?
4, 5, 99
4. What is the KEY difference between
preventative and reactive approaches to testing?
Preventative tests are designed early; reactive
tests are designed after the software has been produced.
5. What is the purpose of exit
criteria?
The purpose of exit criteria is to define when a
test level is completed.
6. What determines the level of risk?
The likelihood of an adverse event and the
impact of the event determine the level of risk.
8. What is the MAIN objective when
reviewing a software deliverable?
To identify defects in any software work product.
9. Which of the following defines the
expected results of a test? Test case specification or test design
specification.
Test case specification defines the expected
results of a test.
10. What is the benefit of test
independence?
It avoids author bias in defining effective tests.
11. As part of which test process do
you determine the exit criteria?
The exit criteria is determined on the bases of
‘Test Planning’.
12. What is beta testing?
Testing performed by potential customers at their
own locations.
16. What is the difference between
Testing Techniques and Testing Tools?
Testing technique: – Is a process for ensuring that
some aspects of the application system or unit functions properly there may be
few techniques but many tools.
Testing Tools: – Is a vehicle for performing a test
process. The tool is a resource to the tester, but it is insufficient to
conduct testing
17. We use the output of the
requirement analysis, the requirement specification as the input for writing …
User Acceptance Test Cases
18. Repeated Testing of an already
tested program, after modification, to discover any defects introduced or
uncovered as a result of the changes in the software being tested or in another
related or unrelated software component:
Regression Testing
19. What is component testing?
Component testing, also known as unit, module and
program testing, searches for defects in, and verifies the functioning of
software (e.g. modules, programs, objects, classes, etc.) that are separately
testable. Component testing may be done in isolation from the rest of the
system depending on the context of the development life cycle and the system.
Most often stubs and drivers are used to replace the missing software and
simulate the interface between the software components in a simple manner. A
stub is called from the software component to be tested; a driver calls a
component to be tested.
20. What is functional system
testing?
Testing the end to end functionality of the system
as a whole is defined as a functional system testing.
21. What are the benefits of
Independent Testing?
Independent testers are unbiased and identify
different defects at the same time.
23. What are the different
Methodologies in Agile Development Model?
There are currently seven different agile
methodologies that I am aware of:
1. Extreme Programming (XP)
2. Scrum
3. Lean Software Development
4. Feature-Driven Development
5. Agile Unified Process
6. Crystal
7. Dynamic Systems Development Model (DSDM)
24. Which activity in the fundamental
test process includes evaluation of the testability of the requirements and
system?
A ‘Test Analysis’ and ‘Design’ includes evaluation
of the testability of the requirements and system.
25. What is typically the MOST
important reason to use risk to drive testing efforts?
Because testing everything is not feasible.
26. What is random/monkey testing?
When it is used?
Random testing often known as monkey testing. In
such type of testing data is generated randomly often using a tool or automated
mechanism. With this randomly generated input the system is tested and results
are analysed accordingly. These testing are less reliable; hence it is normally
used by the beginners and to see whether the system will hold up under adverse
effects.
27. Which of the following are valid
objectives for incident reports?
1. Provide developers and other parties with feedback
about the problem to enable identification, isolation and correction as necessary.
2. Provide ideas for test process improvement.
3. Provide a vehicle for assessing tester competence.
4. Provide testers with a means of tracking the
quality of the system under test.
28. Consider the following
techniques. Which are static and which are dynamic techniques?
1. Equivalence Partitioning.
2. Use Case Testing.
3. Data Flow Analysis.
4. Exploratory Testing.
5. Decision Testing.
6. Inspections.
Data Flow Analysis and Inspections are static;
Equivalence Partitioning, Use Case Testing, Exploratory Testing and Decision
Testing are dynamic.
29. Why are static testing and
dynamic testing described as complementary?
Because they share the aim of identifying defects
but differ in the types of defect they find.
30. What are the phases of a formal
review?
In contrast to informal reviews, formal reviews
follow a formal process. A typical formal review process consists of six main
steps:
1. Planning
2. Kick-off
3. Preparation
4. Review meeting
5. Rework
6. Follow-up.
31. What is the role of moderator in
review process?
The moderator (or review leader) leads the review
process. He or she determines, in co-operation with the author, the type of
review, approach and the composition of the review team. The moderator performs
the entry check and the follow-up on the rework, in order to control the
quality of the input and output of the review process. The moderator also
schedules the meeting, disseminates documents before the meeting, coaches other
team members, paces the meeting, leads possible discussions and stores the data
that is collected.
32. What is an equivalence partition
(also known as an equivalence class)?
An input or output ranges of values such that only
one value in the range becomes a test case.
33. When should configuration
management procedures be implemented?
During test planning.
34. A Type of functional Testing,
which investigates the functions relating to detection of threats, such as
virus from malicious outsiders?
Security Testing
35. Testing wherein we subject the
target of the test , to varying workloads to measure and evaluate the
performance behaviours and ability of the target and of the test to continue to
function properly under these different workloads?
Load Testing
36. Testing activity which is
performed to expose defects in the interfaces and in the interaction between
integrated components is?
Integration Level Testing
37. What are the Structure-based
(white-box) testing techniques?
Structure-based testing techniques (which are also
dynamic rather than static) use the internal structure of the software to
derive test cases. They are commonly called 'white-box' or 'glass-box'
techniques (implying you can see into the system) since they require knowledge
of how the software is implemented, that is, how it works. For example, a
structural technique may be concerned with exercising loops in the software.
Different test cases may be derived to exercise the loop once, twice, and many
times. This may be done regardless of the functionality of the software.
38. When “Regression Testing” should
be performed?
After the software has changed or when the
environment has changed Regression testing should be performed.
39. What
is negative and positive testing?
A negative test is when you put in an invalid input
and receives errors. While a positive testing, is when you put in a valid input
and expect some action to be completed in accordance with the
specification.
40. What is the purpose of a test
completion criterion?
The purpose of test completion criterion is to
determine when to stop testing
41. What can static analysis NOT
find?
For example memory leaks.
42. What is the difference between
re-testing and regression testing?
Re-testing ensures the original fault has been
removed; regression testing looks for unexpected side effects.
43. What are the Experience-based
testing techniques?
In experience-based techniques, people's knowledge,
skills and background are a prime contributor to the test conditions and test
cases. The experience of both technical and business people is important, as
they bring different perspectives to the test analysis and design process. Due
to previous experience with similar systems, they may have insights into what
could go wrong, which is very useful for testing.
44. What type of review requires
formal entry and exit criteria, including metrics?
Inspection
45. Could reviews or inspections be
considered part of testing?
Yes, because both help detect faults and improve
quality.
46. An input field takes the year of
birth between 1900 and 2004 what are the boundary values for testing this
field?
1899,1900,1950, 1951, 2004,2005
49. What is the one Key reason why
developers have difficulty testing their own work?
Lack of Objectivity
51. When should testing be stopped?
It depends on the risks for the system being
tested. There are some criteria bases on which you can stop testing.
1. Deadlines (Testing, Release)
2. Test budget has been depleted
3. Bug rate fall below certain level
4. Test cases completed with certain percentage passed
5. Alpha or beta periods for testing ends
6. Coverage of code, functionality or requirements are
met to a specified point
52. Which of the following is the
main purpose of the integration strategy for integration testing in the small?
The main purpose of the integration strategy is to
specify which modules to combine when and how many at once.
55. What is black box testing?
What are the different black box testing techniques?
Black box testing is the software testing method
which is used to test the software without knowing the internal structure of
code or program. This testing is usually done to check the functionality of an
application. The different black box testing techniques are
1. Equivalence Partitioning
2. Boundary value analysis
56.
Which review is normally used to evaluate a product to determine its
suitability for intended use and to identify discrepancies?
Technical Review.
58. Faults found should be originally
documented by whom?
By testers.
59. Which is the current formal
world-wide recognized documentation standard?
There isn’t one.
60. Which of the following is the
review participant who has created the item to be reviewed?
Author
61. A number of critical bugs are
fixed in software. All the bugs are in one module, related to reports. The test
manager decides to do regression testing only on the reports module.
Regression testing should be done on other modules
as well because fixing one module may affect other modules.
62. Why does the boundary value
analysis provide good test cases?
Because errors are frequently made during
programming of the different cases near the ‘edges’ of the range of values.
63. What makes an inspection
different from other review types?
It is led by a trained leader, uses formal entry
and exit criteria and checklists.
64. Why can be tester dependent on
configuration management?
Because configuration management assures that we
know the exact version of the testware and the test object.
65. What is a V-Model?
A software development model that illustrates how
testing activities integrate with software development phases
66. What is maintenance testing?
Triggered by modifications, migration or retirement
of existing software
67. What is test coverage?
Test coverage measures in some specific way the
amount of testing performed by a set of tests (derived in some other way, e.g.
using specification-based techniques). Wherever we can count things and can
tell whether or not each of those things has been tested by some test, then we
can measure coverage.
69. When do we prepare RTM
(Requirement traceability matrix), is it before test case designing or after
test case designing?
It would be before test case designing.
Requirements should already be traceable from Review activities since you
should have traceability in the Test Plan already. This question also would
depend on the organisation. If the organisations do test after development
started then requirements must be already traceable to their source. To make
life simpler use a tool to manage requirements.
70. What is called the process
starting with the terminal modules?
Bottom-up integration
71. During which test activity could
faults be found most cost effectively?
During test planning
72. The purpose of requirement phase
is
To freeze requirements, to understand user needs,
to define the scope of testing
73. Why we split testing into
distinct stages?
We split testing into distinct stages because of
following reasons,
1. Each test stage has a different purpose
2. It is easier to manage testing in stages
3. We can run different test into different
environments
4. Performance and quality of the testing is improved
using phased testing
74. What is DRE?
To measure test effectiveness a powerful metric is
used to measure test effectiveness known as DRE (Defect Removal Efficiency)
From this metric we would know how many bugs we have found from the set of test
cases. Formula for calculating DRE is
DRE=Number of bugs while testing / number of
bugs while testing + number of bugs found by user
75. Which of the following is likely
to benefit most from the use of test tools providing test capture and replay
facilities? a) Regression testing b) Integration testing c) System testing d)
User acceptance testing
Regression testing
76. How would you estimate the amount
of re-testing likely to be required?
Metrics from previous similar projects and
discussions with the development team
77. What studies data flow analysis?
The use of data on paths through the code.
78. What is Alpha testing?
Pre-release testing by end user representatives at
the developer’s site.
79. What is a failure?
Failure is a departure from specified behaviour.
80. What are Test comparators?
Is it really a test if you put some inputs into
some software, but never look to see whether the software produces the correct
result? The essence of testing is to check whether the software produces the
correct result, and to do that, we must compare what the software produces to
what it should produce. A test comparator helps to automate aspects of that
comparison.
81. Who is responsible for document
all the issues, problems and open point that were identified during the review
meeting
Scribe
82. What is the main purpose of
Informal review
Inexpensive way to get some benefit
83. What is the purpose of test
design technique?
Identifying test conditions and Identifying test
cases
84. When testing a grade calculation
system, a tester determines that all scores from 90 to 100 will yield a grade
of A, but scores below 90 will not. This analysis is known as:
Equivalence partitioning
85. A test manager wants to use the
resources available for the automated testing of a web application. The best
choice is Tester,
test automater, web specialist, DBA
86. During the testing of a module
tester ‘X’ finds a bug and assigned it to developer. But developer rejects the
same, saying that it’s not a bug. What ‘X’ should do?
Send to the detailed information of the bug
encountered and check the reproducibility
88. In practice, which Life Cycle
model may have more, fewer or different levels of development and testing,
depending on the project and the software product. For example, there may be
component integration testing after component testing, and system integration
testing after system testing.
V-Model
89. Which technique can be used to
achieve input and output coverage? It can be applied to human input, input via
interfaces to a system, or interface parameters in integration testing.
Equivalence partitioning
90. “This life cycle model is
basically driven by schedule and budget risks” This statement is best suited
for…
V-Model
91. In which order should tests be
run?
The most important one must tests first
92. The later in the development life
cycle a fault is discovered, the more expensive it is to fix. Why?
The fault has been built into more documentation,
code, tests, etc
93. What is Coverage measurement?
It is a partial measure of test thoroughness.
94. What is Boundary value testing?
Test boundary conditions on, below and above the
edges of input and output equivalence classes. For instance, let say a bank
application where you can withdraw maximum Rs.20,000 and a minimum of Rs.100,
so in boundary value testing we test only the exact boundaries, rather than
hitting in the middle. That means we test above the maximum limit and
below the minimum limit.
97.The purpose of which is allow
specific tests to be carried out on a system or network that resembles as
closely as possible the environment where the item under test will be used upon
release?
Test Environment
98. What can be thought of as being
based on the project plan, but with greater amounts of detail?
Phase Test Plan
99. What is exploratory testing?
Exploratory testing is a hands-on approach in
which testers are involved in minimum planning and maximum test execution. The
planning involves the creation of a test charter, a short declaration of the
scope of a short (1 to 2 hour) time-boxed test effort, the objectives and
possible approaches to be used. The test design and test execution activities
are performed in parallel typically without formally documenting the test conditions,
test cases or test scripts. This does not mean that other, more formal testing
techniques will not be used. For example, the tester may decide to use boundary
value analysis but will think through and test the most important boundary
values without necessarily writing them down. Some notes will be written during
the exploratory-testing session, so that a report can be produced afterwards.
100. What is “use case testing”?
In order to identify and execute the functional
requirement of an application from end to finish “use case” is used and the
techniques used to do this is known as “Use Case Testing”
Bonus!
101. What is the difference between
STLC ( Software Testing Life Cycle) and SDLC ( Software Development
Life Cycle) ?
The complete Verification and Validation of
software is done in SDLC, while STLC only does Validation of the system. SDLC
is a part of STLC.
102. What is traceability matrix?
The relationship between test cases and
requirements is shown with the help of a document. This document is known as
traceability matrix.
103. What is Equivalence partitioning
testing?
Equivalence partitioning testing is a software
testing technique which divides the application input test data into each
partition at least once of equivalent data from which test cases can be
derived. By this testing method it reduces the time required for software
testing.
104. What is white box testing and
list the types of white box testing?
White box testing technique involves selection of
test cases based on an analysis of the internal structure (Code coverage,
branches coverage, paths coverage, condition coverage etc.) of a
component or system. It is also known as Code-Based testing or Structural
testing. Different types of white box testing are
1. Statement Coverage
2. Decision Coverage
105. In white box testing what
do you verify?
In white box testing following steps are verified.
1. Verify the security holes in the code
2. Verify the incomplete or broken paths in the code
3. Verify the flow of structure according to the
document specification
4. Verify the expected outputs
5. Verify all conditional loops in the code to check
the complete functionality of the application
6. Verify the line by line coding and cover 100%
testing
106. What is the difference between
static and dynamic testing?
Static testing: During Static testing method, the
code is not executed and it is performed using the software documentation.
Dynamic testing: To perform this testing the
code is required to be in an executable form.
107. What is verification and validation?
Verification is a process of evaluating
software at development phase and to decide whether the product of a
given application satisfies the specified requirements. Validation is the
process of evaluating software at the end of the development process and to
check whether it meets the customer requirements.
108. What are different test levels?
There are four test levels
1. Unit/component/program/module testing
2. Integration testing
3. System testing
4. Acceptance testing
109. What is Integration testing?
Integration testing is a level of software testing
process, where individual units of an application are combined and tested. It
is usually performed after unit and functional testing.
110. What are the tables in
testplans?
Test design, scope, test strategies , approach are
various details that Test plan document consists of.
1. Test case identifier
2. Scope
3. Features to be tested
4. Features not to be tested
5. Test strategy & Test approach
6. Test deliverables
7. Responsibilities
8. Staffing and training
9. Risk and Contingencies
111. What is the difference
between UAT (User Acceptance Testing) and System testing?
System Testing: System testing is finding defects
when the system under goes testing as a whole, it is also known as end to end
testing. In such type of testing, the application undergoes from beginning till
the end.
UAT: User Acceptance Testing (UAT) involves running
a product through a series of specific tests which determines
whether the product wil meet the needs of its users.
Q. What
is Dynamic Testing?
Ans. It is the testing done by executing the code or program with various input values and output is verified.
Ans. It is the testing done by executing the code or program with various input values and output is verified.
Q. What
is GUI Testing?
Ans. GUI or Graphical user interface testing is the process of testing software user interface against the provided requirements/mockups/HTML designs.
Ans. GUI or Graphical user interface testing is the process of testing software user interface against the provided requirements/mockups/HTML designs.
Q. What
is Formal Testing?
Ans. Software verification carried out by following test plan, testing procedures and proper documentation with an approval from customer
Ans. Software verification carried out by following test plan, testing procedures and proper documentation with an approval from customer
Q. What
is Risk Based Testing?
Ans. Identifying the critical functionality in the system then deciding the orders in which these functionality to be tested and applying testing.
Ans. Identifying the critical functionality in the system then deciding the orders in which these functionality to be tested and applying testing.
Q. What
is Early Testing?
Ans. Conducting testing as soon as possible in development life cycle to find defects at early stages of SDLC.
Early testing is helpful to reduce the cost of fixing defects at later stages of STLC.
Ans. Conducting testing as soon as possible in development life cycle to find defects at early stages of SDLC.
Early testing is helpful to reduce the cost of fixing defects at later stages of STLC.
Q. What
is Exhaustive Testing?
Ans. Testing functionality with all valid, invalid inputs and preconditions is called exhaustive testing.
Ans. Testing functionality with all valid, invalid inputs and preconditions is called exhaustive testing.
Q. What
is Defect Clustering?
Ans. Any small module or functionality may contain more number of defects – concentrate more testing on this functionality.
Ans. Any small module or functionality may contain more number of defects – concentrate more testing on this functionality.
Q. What
is Static Testing?
Ans. Manual verification of the code without executing the program is called as static testing. In this process issues are identified in code by checking code, requirement and design documents.
Ans. Manual verification of the code without executing the program is called as static testing. In this process issues are identified in code by checking code, requirement and design documents.
Q. What
is Positive Testing?
Ans. Testing conducted on the application to determine if system works. Basically known as “test to pass” approach.
Ans. Testing conducted on the application to determine if system works. Basically known as “test to pass” approach.
Q. What
is Negative Testing?
Ans. Testing Software with negative approach to check if system is not “showing error when not supposed to” and “not showing error when supposed to”.
Ans. Testing Software with negative approach to check if system is not “showing error when not supposed to” and “not showing error when supposed to”.
Q. What
is End-to-End Testing?
Ans. Testing the overall functionality of the system including the data integration among all the modules is called end to end testing.
Ans. Testing the overall functionality of the system including the data integration among all the modules is called end to end testing.
Q. What
is Exploratory Testing?
Ans. Exploring the application, understanding the functionality, adding (or) modifying existing test cases for better testing is called exploratory testing.
Ans. Exploring the application, understanding the functionality, adding (or) modifying existing test cases for better testing is called exploratory testing.
Q. What
is Monkey Testing
Ans. Testing conducted on a application without any plan and carried out with tests here and there to find any system crash with an intention of finding tricky defects is called monkey testing.
Ans. Testing conducted on a application without any plan and carried out with tests here and there to find any system crash with an intention of finding tricky defects is called monkey testing.
Q. What
is Non-functionality Testing?
Ans. Validating various non-functional aspects of the system such as user interfaces, user friendliness security, compatibility, Load, Stress and Performance etc is called non-functional testing.
Ans. Validating various non-functional aspects of the system such as user interfaces, user friendliness security, compatibility, Load, Stress and Performance etc is called non-functional testing.
Q. What
is Usability Testing?
Ans. Checking how easily the end users are able to understand and operate the application is called Usability Testing.
Ans. Checking how easily the end users are able to understand and operate the application is called Usability Testing.
Q. What
is Security Testing
Ans. Validating whether all security conditions are properly implemented in the software (or) not is called security testing.
Ans. Validating whether all security conditions are properly implemented in the software (or) not is called security testing.
Q. What
is Performance Testing?
Ans. Process of measuring various efficiency characteristics of a system such as response time, through put, load stress transactions per minutes transaction mix.
Ans. Process of measuring various efficiency characteristics of a system such as response time, through put, load stress transactions per minutes transaction mix.
Q. What
is Load Testing?
Ans. Analyzing functional and performance behavior of the application under various conditions is called Load Testing.
Ans. Analyzing functional and performance behavior of the application under various conditions is called Load Testing.
Q. What
is Stress Testing?
Ans. Checking the application behavior under stress conditions
(or)
Reducing the system resources and keeping the load as constant checking how does the application is behaving is called stress testing.
Ans. Checking the application behavior under stress conditions
(or)
Reducing the system resources and keeping the load as constant checking how does the application is behaving is called stress testing.
Q. What
is Process?
Ans. A process is set of a practices performed to achieve a give purpose; it may include tools, methods, materials and or people.
Ans. A process is set of a practices performed to achieve a give purpose; it may include tools, methods, materials and or people.
Q. What
is Software Configuration Management?
Ans.The process of identifying, Organizing and controlling changes to software development and maintenance.
(or)
A methodology to control and manage a software development project
Ans.The process of identifying, Organizing and controlling changes to software development and maintenance.
(or)
A methodology to control and manage a software development project
Q. What is Testing Process / Life Cycle?
Ans. Write Test Plan
Test Scenarios
Test Cases
Executing Test Cases
Test Results
Defect Reporting
Defect Tracking
Defect Closing
Test Release
Ans. Write Test Plan
Test Scenarios
Test Cases
Executing Test Cases
Test Results
Defect Reporting
Defect Tracking
Defect Closing
Test Release
Q. What is full form of CMMI?
Ans. Capability Maturity Model Integration
Ans. Capability Maturity Model Integration
Q. What is Code Walk Through?
Ans. Informal analysis of the program source code to find defects and verify coding techniques.
Ans. Informal analysis of the program source code to find defects and verify coding techniques.
Q. What is Unit Level Testing?
Ans. Testing of single programs, modules or unit of code.
Ans. Testing of single programs, modules or unit of code.
Q. What is Integration Level Testing?
Ans. Testing of related programs, Modules (or) Unit of code.
(or)
Partitions of the system ready for testing with other partitions of the system.
Ans. Testing of related programs, Modules (or) Unit of code.
(or)
Partitions of the system ready for testing with other partitions of the system.
Q. What is System Level Testing?
Ans. Testing of entire computer system across all modules. This kind of testing can include functional and structural testing.
Ans. Testing of entire computer system across all modules. This kind of testing can include functional and structural testing.
Q. What is Alpha Testing?
Ans. Testing of whole computer system before rolling out to the UAT.
Ans. Testing of whole computer system before rolling out to the UAT.
Q. What is User Acceptance Testing
(UAT)?
Ans. Testing of computer system by client to verify if it adhered to the provided requirements.
Ans. Testing of computer system by client to verify if it adhered to the provided requirements.
Q. What is Test Plan?
Ans. A document describing the scope, approach, resources, and schedule of testing activities. It identifies test items, features to be tested, testing tasks, who will do each task, and any risks requiring contingency planning.
Ans. A document describing the scope, approach, resources, and schedule of testing activities. It identifies test items, features to be tested, testing tasks, who will do each task, and any risks requiring contingency planning.
Q. What is Test Scenario?
Ans. Identify all the possible areas to be tested (or) what to be tested.
Ans. Identify all the possible areas to be tested (or) what to be tested.
Q. What is a Defect?
Ans.Expected result is not matching with the application actual result.
Ans.Expected result is not matching with the application actual result.
Q. What is Severity?
Ans. It defines the important of defect with respect to functional point of view i.e. how critical is defect with respective to the application.
Ans. It defines the important of defect with respect to functional point of view i.e. how critical is defect with respective to the application.
Q. What is Priority?
Ans. It indicates the importance or urgency of fixing a defect
Ans. It indicates the importance or urgency of fixing a defect
Q. What is Re-Testing?
Ans. Retesting the application to verify whether defects have been fixed or not.
Ans. Retesting the application to verify whether defects have been fixed or not.
Q. What is Regression Testing?
Ans. Verifying existing functional and non-functional area after making changes to the part of the software or addition of new features.
Ans. Verifying existing functional and non-functional area after making changes to the part of the software or addition of new features.
Q. What is Recovery Testing?
Ans. Checking if the system is able to handle some unexpected unpredictable situations is called recovery testing.
Ans. Checking if the system is able to handle some unexpected unpredictable situations is called recovery testing.
Q. What is Globalization Testing?
Ans. Process of verifying software whether it can be run independent of its geographical and cultural environment. Checking if the application is having features of setting and changing language, date, format and currency if it is designed for global users.
Ans. Process of verifying software whether it can be run independent of its geographical and cultural environment. Checking if the application is having features of setting and changing language, date, format and currency if it is designed for global users.
Q. What is Localization Testing?
Ans. Verifying of globalized application for a particular locality of users, cultural and geographical conditions.
Ans. Verifying of globalized application for a particular locality of users, cultural and geographical conditions.
Q. What is Installation Testing?
Ans. Checking if we are able to install the software successfully (or) not as per the guidelines given in installation document is called installation testing.
Ans. Checking if we are able to install the software successfully (or) not as per the guidelines given in installation document is called installation testing.
Q. What is Un-installation Testing?
Ans. Checking if we are able to uninstall the software from the system successfully (or) not is called Uninstallation Testing
Ans. Checking if we are able to uninstall the software from the system successfully (or) not is called Uninstallation Testing
Q. What is Compatibility Testing?
Ans. Checking if the application is compatible to different software and hardware environment or not is called compatibility testing.
Ans. Checking if the application is compatible to different software and hardware environment or not is called compatibility testing.
Q. What is Test Strategy?
Ans. It is a part of test plan describing how testing is carried out for the project and what testing types needs to be performed on the application.
Ans. It is a part of test plan describing how testing is carried out for the project and what testing types needs to be performed on the application.
Q. What is Test Case?
Ans. A Test case is a set of preconditions steps to be followed with input data and expected behavior to validate a functionality of a system.
Ans. A Test case is a set of preconditions steps to be followed with input data and expected behavior to validate a functionality of a system.
Q. What is Business Validation Test Case?
Ans. A test case is prepared to check business condition or business requirement is called business validation test case.
Ans. A test case is prepared to check business condition or business requirement is called business validation test case.
Q. What is a Good Test Case?
Ans. A Test case that have high priority of catching defects in called a good test case.
Ans. A Test case that have high priority of catching defects in called a good test case.
Q. What is Use Case Testing?
Ans. Validating a software to confirm whether it is developed as per the use cases or not is called use case testing.
Ans. Validating a software to confirm whether it is developed as per the use cases or not is called use case testing.
Q. What is Defect Age?
Ans. The time gap between date of detection & date of closure of a defect.
Ans. The time gap between date of detection & date of closure of a defect.
Q. What is Showstopper Defect?
Ans. A defect which is not permitting to continue further testing is called Showstopper Defect
Ans. A defect which is not permitting to continue further testing is called Showstopper Defect
Q. What is Test Closure?
Ans. It is the last phase of the STLC, where the management prepares various test summary reports that explains the complete statistics of the project based on the testing carried out.
Ans. It is the last phase of the STLC, where the management prepares various test summary reports that explains the complete statistics of the project based on the testing carried out.
Q. What is Bucket Testing?
Ans. Bucket testing is also know as A/B testing. It is mostly used to study the impact of the various product designs in website metrics. Two simultaneous versions are run on a single or set of web pages to measure the difference in click rates, interface and traffic.
Ans. Bucket testing is also know as A/B testing. It is mostly used to study the impact of the various product designs in website metrics. Two simultaneous versions are run on a single or set of web pages to measure the difference in click rates, interface and traffic.
Q. What is Concurrency
Testing?
Ans. This is a multiple user testing to access the application at the same time to verify effect on code, module or DB. Mainly used to identify locking and deadlocking situations in the code.
Ans. This is a multiple user testing to access the application at the same time to verify effect on code, module or DB. Mainly used to identify locking and deadlocking situations in the code.
Q. What is Web Application Testing?
Ans. Web application testing is done on a website to check – load, performance, security, Functionality, Interface, Compatibility and other usability related issues.
Ans. Web application testing is done on a website to check – load, performance, security, Functionality, Interface, Compatibility and other usability related issues.
Q. What is Unit Testing?
Ans. Unit testing is done to check whether the individual modules of the source code are working properly or not.
Ans. Unit testing is done to check whether the individual modules of the source code are working properly or not.
Q. What is Interface Testing
Ans. Interface testing is done to check whether the individual modules are communicating properly as per specifications. Interface testing is mostly used to test the user interface of GUI applications.
Ans. Interface testing is done to check whether the individual modules are communicating properly as per specifications. Interface testing is mostly used to test the user interface of GUI applications.
Q. What is Test Harness?
Ans. Test Harness is configuring a set of tools and test data to test an application in various conditions, which involves monitoring the output with expected output for correctness.
The benefits of Testing Harness are: Productivity increase due to process automation and increase in product quality
Ans. Test Harness is configuring a set of tools and test data to test an application in various conditions, which involves monitoring the output with expected output for correctness.
The benefits of Testing Harness are: Productivity increase due to process automation and increase in product quality
Q. What is Scalability Testing?
Ans. It is used to check whether the functionality and performance of a system, whether system is capable to meet the volume and size changes as per the requirements
Scalability testing is done using load test by changing various software, hardware configurations and testing environment.
Ans. It is used to check whether the functionality and performance of a system, whether system is capable to meet the volume and size changes as per the requirements
Scalability testing is done using load test by changing various software, hardware configurations and testing environment.
Q. What is Fuzz Testing?
Ans. Fuzz testing is a black box testing technique which uses a random bad data to attack a program to check if anything breaks in the application.
Ans. Fuzz testing is a black box testing technique which uses a random bad data to attack a program to check if anything breaks in the application.
Q. What is Difference between QA, QC and testing?
Ans. QA?
It is process oriented
Aim is to prevent defects in an application
Ans. QA?
It is process oriented
Aim is to prevent defects in an application
QC?
Set of activities used to evaluate a developed work product
It is product oriented
Set of activities used to evaluate a developed work product
It is product oriented
Testing?
Executing and verifying application with the intention of finding defects
Executing and verifying application with the intention of finding defects
No comments:
Post a Comment